当前位置:首页 >产品中心 > MOLEX连接器 > 接线端子
接线端子

(Molex接线端子系列产品更详细信息请浏览Molex公司网站:www.Molex.com

Solderless Terminals Families
Wire Management Products
Wire Management Products make identifying, protecting and organizing cables and wires a snap
Perma-Fit™
Thin-wall tubing made of polyolefin has excellent physical, chemical and electrical properties meeting both industrial and military requirements for general purpose tubing
Self-Contained Power Connector
Use to splice and tap solid and stranded non-metallic sheathed cable. The connector family supports two and three conductor plus ground circuits for AC power applications.
Quick Disconnect
Quick disconnects allow for quickly connecting or disconnecting a terminal. The front end of the terminal has a female-type receptacle which allows the terminal to slide onto and off of a male blade.
Snap Plugs and Receptacles
A round bullet-like terminal that plugs (or snaps) into the female receptacle. Like a coupler set, the male and female can be connected and disconnected many times.
Splice
Standard and special splices for nearly every type of wiring need.
Ring Tongue - Spade Terminals
Assortment of rings and spades in several different barrel styles, available loose piece or on one or more carrier types.
Battery Cable Lugs
Heavy duty ring tongue terminals for 250 MCM to 8 AWG wire sizes and 600V applications.
Magnet Wire Connectors
Complete line of crimp terminals and connectors that provide solutions for the splicing and tapping of magnet wire and aluminum wire. Our taps and splices have an open side which permits easy access to wire and makes internal coil tapping easy.
Heat Sealable Terminals
Perma-Seal all-weather heat sealable terminals and splices provide a rugged, environmentally sealed connection for wire sizes 8-22 AWG that will insulate, seal, and protect wire splices from physical abuse and abrasion, water, salt, and other corrosive compounds.
Military Specification Rectangular Tongue
The Mil-T-7928 specification encompasses and governs several military standards: MS-20659, Uninsulated Ring Terminals; MS-25036, Insulated Ring Terminals; and MS-17143, Insulated Rectangular Terminals.
Insulation Displacement Connectors
Self-tapping Tap-and-run connectors - the Multi-Lock makes quick splices without the need for stripping, twisting, or soldering, using only pliers. The Wire Tap is actually a fully insulated female quick disconnect that can be spliced onto a wire and then mated with a fully insulated male quick disconnect, also without stripping, twisting, soldering or special tools.
Terminal Blocks and Strips
Molex offers a wide variety of terminal blocks. All standard terminal blocks are RoHS compliant. Our selection includes Beau™ barrier terminal strips, ESE and Beau Eurostyle™ terminal blocks, 2-screw Eurostyle and Multi-Terminal Connectors.
Wire Pins
For a quick and easy connection in applications where set screws or clamps are used to make electrical contact with the wire. Fits all popular pin-type (European) terminal