Molex射频连接器,同轴连接器,微波连接器系列。产品详情请浏览Molex公司网站www.molex.com
Connectors and Adapters |
||
DIN 1.0/2.3 Available in 50 or 75 Ohm. Design to meet DIN 41626 this connector operates to 10 GHz. | DIN 7/16 These rugged, low loss, high power connectors are typically used in wireless infrastructure applications. | |
BMA Designed for applications that require blind mating with good performance to 18 GHz. | BNC Traditional bayonet style connectors in both 50 and 75 Ohm configurations. Reverse polarity available. | |
Coax D-SUB Combinations of coaxial, signal and power contacts in one, integrated shell. Cable and PCB styles available. | Type F 75 Ohm plugs and jacks. Some designs capable of working to 3 GHz. | |
MCX Subminiature snap-on connector is 30% smaller than an SMB. 50 and 75 Ohm versions with operating frequency to 6 GHz. | MMCX This microminiature snap-on connector is 45% smaller than an SMB. Available in 50 Ohm impedance. Operates to 6 GHz. Reverse Polarity available. | |
SMA Subminiature 50 Ohm threaded connector that operates to 18 GHz. Some designs operate to 27 GHz. Brass and Stainless versions. Reverse Polarity available. | SMB Subminiature snap-on connector. 50 and 75 Ohm versions that operate to 4 GHz. | |
SMP Subminiature snap-on connector that operates to 40 GHz. Board-to-Board, blindmate, cable and panel styles. | SSMB Microminiature SMB style snap-on connector available in 50 Ohms and operates to 4 GHz. | |
TNC Miniature 50 Ohm threaded connector that operates to 11 GHz. Reverse Polarity designs available for FCC Part 15. | TRIAX Two and Three lug triax connectors are available in cable and panel mount styles. | |
FAKRA/SMB Based on the standard SMB interface, this connector includes a keyed and color coded shroud for automotive telematics applications. | Microcoaxial RF Ultraminiature connector available in PCB vertical and R/A cable versions. | |
QMA Our push-pull mating system withstands over 80 pounds of axial mated connector retention. QMA has performance of an SMA to 6 GHz. | Type N These threaded connectors are available in 50 and 75 Ohm and operate up to 11 GHz. | |
BSA Between series adapters are used to transition between interface types. | Coax Crimp Tool The coax crimp tool is designed to accommodate a range of hex sizes for use with Molex’s most popular RF connectors. | |
CUSTOM One of our specialties is developing solutions for RF interconnect challenges, including ganged, multi-connector blocks. |
Ganged RF The Ganged RF system offers innovative packaging with selectively loaded housings for connecting up to 2.5 GHz single-ended or analog RF signals. |